Pilgrim Studio Distribution

Sandhill Audio Ribbon Microphones

Sandhill Audio 6019A

Ribbon Microphone

- A standard mic stand adapter with allen key (shockmount adapter sold separately).
- Individual measurement data for each microphone.
- Delivered in a Scandinavian birch plywood case (HPRC case with custom foam insert sold separately).

Technical Specifications

Directional characteristics: Figure-of-Eight
Ribbon dimensions: 60 × 4,7 mm
Ribbon technology: NCRT (Nano Composite Ribbon Technology)
Ribbon profile: Sandhill VariGeo (Variable Geometry)
Principle of operation: Pressure Gradient
Body type: Machined Aluminium
Frequency range: 20 Hz - 15 kHz
Sensitivity (open circuit): 3,5 mV/Pa *
Equivalent noise level (A-weighted): 22 dB ( IEC 651) *
Equivalent noise level (CCIR-weighted): 36 dB (ITU-R BS.468-4) *
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL) A-weighted: 72 dB*
Max. SPL, peak before clipping: 154dB
Output impedance: 105 ohm, impedance balanced
Current consumption: 3,1mA, 48 volt phantom powered
Connector: 3-pin male XLR connector, pin 2 Hot
Weight: 450 g
Dimensions: 50/172/25 mm

* exact value is available in the microphone's individual measuring data

Single microphone with standard adaptor: 1450 Euros (ex. VAT) / CHF 1700 (inkl. MWSt.)
Order now

Single microphone with shockmount: 1530 Euros (ex. VAT) / CHF 1790 (inkl. MWSt.)
Order now

Pair with standard adaptor: 2850 Euros (ex. VAT) / CHF 3325 (inkl. MWSt.)
Order now

Pair with shockmounts: 3010 Euros (ex. VAT) / CHF 3500 (inkl. MWSt.)
Order now

Matched Pair with standard adaptor: 3100 Euros (ex. VAT) / CHF 3600 (inkl. MWSt.)
Order now

Matched Pair with shockmounts: 3260 Euros (ex. VAT) / CHF 3780 (inkl. MWSt.)
Order now

HPRC Case instead of Wooden Case: add 240 Euros (ex. VAT) / CHF 285 (inkl. MWSt.)
Order now

Order the Sandhill Audio 6019A matched pair as a demo unit (Switzerland only)

© 2024 Pilgrim Studio Distribution